Polymaker PolyMide PA6-GF 2.0kg 1.75mm 3D Printing Filament - Industrial Range
Polymaker PolyMide PA6-GF
PolyMide™ is a family of Nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free™ technology, PolyMide™ filaments deliver engineering properties intrinsic to Nylon and ease of printing.
PolyMide™ PA6-GF is a glass fiber reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion.
Warp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification.
Fiber Adhesion™ technology improves the layer adhesion of fiber reinforced materials, by optimizing the surface chemistry of the fibers to achieve better dispersion and bonding to the matrix. This results in better strength along the Z-axis and reduced mechanical anisotropy.
RECOMMENDED SETTINGS
Nozzle Temperature:
280˚C – 300˚C *
Printing Speed:
60mm/s
Bed Temperature:
25˚C – 50˚C (Do NOT exceed 50 ˚C)
Bed Surface:
almost any surface with a thin coat of PVA glue or Magigoo PA
Cooling Fan:
OFF
MECHANICAL PROPERTIES
Young’s Modulus:
4431 ± 184 (MPa)
Tensile Strength:
84.5 ± 2.1 (MPa)
Bending Strength:
136.4 ± 1.6 (MPa)
Charpy Impact Strength:
16.5 ± 0.5 (kJ/m2)
THERMAL PROPERTIES
Heat Deflection Temperature
(ISO 75 1.8 MPa):
124 ˚C
Heat Deflection Temperature
(ISO 75 0.45 MPa):
191 ˚C
Melting Temperature:
215 (°C)
